Practice Location
| Visit Dr. Ashwin Deshmukh | Address |
|---|---|
| Rotator Cuff Repair Clinic | OPD No 5, Jupiter Hospital, Prathamesh Park, Baner, Pune, Maharashtra 411045 |
Rotator Cuff Repair
Services/ Treatments
Rotator Cuff Repair Surgeon in Baner, Pune
Â
Rotator cuff repair reattaches a torn shoulder tendon to the bone, usually through keyhole surgery, restoring strength and movement to the arm. Dr. Ashwin Deshmukh, a rotator cuff repair surgeon in Baner, Pune, treats tears that cause shoulder pain, weakness, and disturbed sleep.
If Your Shoulder Wakes You at Night, Read This
There is one symptom that brings more people to a shoulder specialist than any other, and it is not pain during the day. It is the night. A rotator cuff tear has a cruel habit of hurting most when you lie down, especially if you roll onto that side, robbing you of sleep night after night. People often tolerate a sore shoulder for months while they can work around it in daylight, then finally seek help when the broken sleep wears them down.
That pattern is worth taking seriously, because it often points to a tear in the rotator cuff, the group of tendons that lift and steady the arm. Unlike a strain that fades with rest, a true tear tends to stay or slowly grow. Dr. Ashwin Deshmukh, a rotator cuff repair surgeon in Baner, reattaches these torn tendons through keyhole surgery, and the earlier a tear is caught the simpler that repair tends to be. This page explains the injury, why timing matters, and what repair and recovery involve.
Night pain that disturbs sleep, weakness lifting the arm, and trouble reaching overhead are the classic signs of a rotator cuff tear. Repair reattaches the torn tendon to the bone, and catching it early usually makes the surgery simpler.
What the Rotator Cuff Is and Why It Tears
The rotator cuff is a set of four tendons that wrap around the top of the arm bone and hold it snugly in the shoulder socket. They do the quiet work of lifting, rotating, and steadying the arm. Because they are in constant use and sit in a tight space beneath the bony arch of the shoulder, they are vulnerable in two distinct ways.
Tears tend to come from one of two routes:
- Sudden tears: from a fall onto the arm, lifting something too heavy, or a sharp jerk, often in one clear moment
- Gradual tears: from years of wear, repeated overhead work or sport, and the natural thinning of the tendon with age
The gradual kind is the more deceptive. It can start as a small fraying that causes nagging pain, then widen over months until the arm becomes weak, which is why a shoulder that has ached for a while deserves attention rather than patience.
A small, fresh rotator cuff tear is usually easier to repair than one left for months to enlarge and pull back. Tendon that has retracted and weakened is harder to reattach, so early assessment protects your options.
Credentials at a Glance
| Detail | Information |
|---|---|
| Degrees | MBBS, MS Orthopaedics, Fellowship in Arthroscopy |
| Fellowship | Arthroscopy, Lokmanya Hospital, Nigdi, Pune |
| Registration | Maharashtra Medical Council (Reg. No. 2010010073) |
| Membership | Indian Arthroscopic Society |
| Focus | Keyhole shoulder surgery, rotator cuff repair, instability |
Why an Early, Skilled Repair Changes the Outcome
Two things decide how well a rotator cuff repair turns out: how early the tear is caught, and how securely the tendon is reattached. A tear treated while it is still small and mobile gives the surgeon healthy tendon to work with, while one left too long can retract and thin until a clean repair becomes difficult. The surgeon cannot turn back time, but the right one knows when to act and how to fix the tendon so it lasts.
There is also a real difference between simply closing a tear and rebuilding the tendon so it heals strongly onto the bone. A secure repair, with the tendon held firmly against its natural attachment, gives the body the best chance to knit the two together. This is precise work, and it is where dedicated arthroscopy training earns its place.
Dr. Ashwin Deshmukh brings dedicated arthroscopy training to this work. He completed his MBBS and MS Orthopaedics at Dr. D Y Patil Medical College in Pimpri-Chinchwad, followed by a Fellowship in Arthroscopy at Lokmanya Hospital, Nigdi, focusing on keyhole shoulder and joint surgery. That background covers both the judgement to assess a tear accurately and the technique to repair it through small incisions while sparing the surrounding muscle.
Signs of a Rotator Cuff Tear
Rotator cuff tears share a recognisable set of symptoms, though they vary with the size of the tear:
- Night pain: the standout sign, often worse when lying on the affected side
- Weakness lifting the arm: difficulty raising the arm, especially out to the side
- Trouble reaching: pain or struggle reaching overhead or behind the back
- A dull ache: deep in the shoulder, sometimes spreading down the upper arm
- Weakness with daily tasks: combing hair, fastening a seatbelt, lifting a bag
Does a Rotator Cuff Tear Always Need Surgery?
No, and this is an important point. Many smaller or partial tears, particularly in older and less active people, are managed well without surgery using physiotherapy, activity changes, and sometimes an injection to settle inflammation. The goal in those cases is a comfortable, functional shoulder rather than a perfect tendon.
Surgery moves up the list when the tear is full thickness, when weakness is limiting daily life, when a previously active person wants to regain full use, or when a fresh tear in a younger patient is best repaired before it enlarges. Dr. Deshmukh weighs the tear, your age, and how you use your shoulder before recommending a path, rather than treating every tear as a surgical case.
It also helps to be clear about what each path can realistically deliver. Non-surgical care aims for a comfortable shoulder that does what you need day to day, even if some weakness remains. Repair aims to restore the tendon itself and, with it, fuller strength for lifting and overhead use. Knowing which goal fits your life makes the decision far easier, and it is a conversation worth having properly rather than rushing.
Not every rotator cuff tear needs surgery. Small and partial tears often respond to physiotherapy, while full-thickness tears and tears that limit daily life are the ones most likely to benefit from repair.
How Rotator Cuff Repair Is Performed
When repair is the right choice, it is usually done arthroscopically. Through small keyhole incisions, the surgeon views the shoulder on a screen, brings the torn tendon back to its natural attachment on the bone, and anchors it securely with small fixation devices so it can heal in place. Any bony spur that was rubbing on the tendon is smoothed at the same time to give the repair a clean space to recover in.
The keyhole approach matters here because it spares the large shoulder muscles that older open surgery had to cut through. Less disruption to those muscles means a more comfortable early recovery and a better platform for rehabilitation.
Recovery: The Sling, the Patience, and the Payoff
Rotator cuff recovery tests patience more than most, and it helps to understand why. A repaired tendon has to bond back onto bone, and that bond is fragile at first. To protect it, the arm is rested in a sling for several weeks, and the shoulder is moved only gently and within safe limits during that early phase. Lifting and pulling with the arm are off limits until the tendon has had time to take hold.
Once the repair is secure, physiotherapy gradually rebuilds movement and then strength over several months. Most people regain comfortable daily use well before full strength returns. The single most common reason a good repair struggles is doing too much too soon, so following the staged plan closely is what protects the result. Dr. Deshmukh sets out each phase clearly so you know what is safe and when.
The sling is not optional in the early weeks. A rotator cuff repair fails most often when the tendon is loaded before it has bonded to the bone, so protecting it early is what makes the difference between a repair that holds and one that does not.
Cost of Rotator Cuff Repair in Baner, Pune
The figures below are indicative ranges for the Pune market, drawn from current research across hospitals and surgical providers. What you pay depends on the size of the tear, the number of anchors needed, whether a bony spur is also addressed, the hospital room category, and your overall health. A clear written estimate is given after the shoulder is assessed.
| Procedure | Estimated Cost Range in Baner, Pune (INR) |
|---|---|
| Bankart Repair (Shoulder Instability) | Rs. 1,00,000 to Rs. 1,50,000 |
| Latarjet Procedure (Shoulder) | Rs. 1,20,000 to Rs. 1,70,000 |
| Frozen Shoulder (Adhesive Capsulitis) Release | Rs. 80,000 to Rs. 1,20,000 |
| Acromioclavicular (AC) Joint Reconstruction | Rs. 1,00,000 to Rs. 1,50,000 |
| Shoulder Consultation | Rs. 500 to Rs. 1,500 |
Disclaimer: These ranges are estimates for general guidance and do not represent a quoted price. The actual cost is confirmed only after clinical assessment.
What Happens If a Tear Is Left Too Long
Ignoring a rotator cuff tear is rarely a neutral choice. Over time, an untreated full tear can lead to:
- A larger tear: the gap widens as the tendon takes more strain
- Tendon retraction: the tendon pulls back and weakens, making later repair harder
- Muscle wasting: the unused muscle thins, which can affect the final result
- Lasting weakness: some tears left too long cannot be fully repaired
- Shoulder arthritis: long-standing large tears can lead to joint wear over years
None of this means rushing into surgery. It means getting a clear diagnosis early, so the choice is made with full information.
Stop Losing Sleep to a Sore Shoulder
If shoulder pain is keeping you awake or weakening your arm, an early assessment will tell you whether the rotator cuff is torn and what to do about it. Dr. Ashwin Deshmukh will weigh non-surgical care and repair honestly, and act early when that protects your shoulder. He sees patients at Jupiter Hospital, Baner, and across Pune. Book your appointment today and get your nights back.
Frequently Asked Questions
Who is the best rotator cuff repair surgeon in Baner, Pune?
Dr. Ashwin Deshmukh is an experienced rotator cuff repair surgeon in Baner, Pune. He holds MBBS, MS Orthopaedics, and a dedicated Fellowship in Arthroscopy, and he performs keyhole rotator cuff repair, assessing each tear carefully to decide whether surgery or non-surgical care is the better path.
Why is rotator cuff pain worse at night?
Night pain is a classic sign of a rotator cuff tear. Lying down removes the support the arm has during the day and can increase pressure on the inflamed tendon, especially when you roll onto that side. Persistent night pain in the shoulder is worth getting assessed.
Does a rotator cuff tear always need surgery?
No. Many small or partial tears are managed well without surgery using physiotherapy and activity changes, particularly in older or less active people. Full-thickness tears, significant weakness, or a tear in an active person are more likely to need repair. Assessment decides the path.
How long is recovery after rotator cuff repair?
The arm is rested in a sling for several weeks to protect the repair, followed by physiotherapy that rebuilds movement and then strength over several months. Comfortable daily use returns well before full strength. Doing too much too soon is the main cause of a repair failing.
How much does rotator cuff repair cost in Baner, Pune?
Arthroscopic rotator cuff repair in the Baner and Pune area generally ranges from Rs. 1,00,000 to Rs. 1,90,000 depending on the size of the tear and the anchors needed. Non-surgical management costs less. A written estimate follows clinical assessment of the shoulder.